 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MBRF1090CT & MBRF10100CT Vishay General Semiconductor Dual Common-Cathode High-Voltage Schottky Rectifier FEATURES * Guardring for overvoltage protection * Lower power losses, high efficiency * Low forward voltage drop * High forward surge capability * High frequency operation * Solder dip 260 C, 40 s * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection application. MECHANICAL DATA Case: ITO-220AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum ITO-220AB 1 PIN 1 PIN 3 PIN 2 2 3 PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF TJ max. 5.0 A x 2 90 V, 100 V 120 A 0.75 V 150 C MAXIMUM RATINGS (TC = 25 C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TC = 105 C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode Peak repetitive reverse current per diode at tp = 2 s, 1 kHz Voltage rate of change (rated VR) Operating junction and storage temperature range Isolation voltage from terminal to heatsink with t = 1 min total device per diode SYMBOL VRRM VRWM VDC IF(AV) IFSM IRRM dV/dt TJ, TSTG VAC MBRF1090CT 90 90 90 10 5.0 120 0.5 10 000 - 65 to + 150 1500 MBRF10100CT 100 100 100 UNIT V V V A A A V/s C V ELECTRICAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage per diode (1) Maximum reverse current per diode at working peak reverse voltage (1) Note: (1) Pulse test: 300 s pulse width, 1 % duty cycle Document Number: 88681 Revision: 08-Nov-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 TEST CONDITIONS IF = 5.0 A IF = 5.0 A TC = 125 C TC = 25 C TJ = 25 C TJ = 100 C SYMBOL VF IR MBRF1090CT MBRF10100CT UNIT V A mA 0.75 0.85 100 6.0 MBRF1090CT & MBRF10100CT Vishay General Semiconductor THERMAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER Typical thermal resistance per diode SYMBOL RJC MBRF1090CT MBRF10100CT 6.8 UNIT C/W ORDERING INFORMATION (Example) PACKAGE ITO-220AB PREFERRED P/N MBRF10100CT-E3/45 UNIT WEIGHT (g) 1.99 PACKAGE CODE 45 BASE QUANTITY 50/tube DELIVERY MODE Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 10 100 Resistive or Inductive Load Instantaneous Forward Current (A) Average Forward Current (A) TJ = 150 C 10 TJ = 100 C TJ = 175 C 1 TJ = 25 C 8 6 4 0.1 2 0 0 50 100 150 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Case Temperature (C) Instantaneous Forward Voltage (V) Figure 1. Forward Current Derating Curve Figure 3. Typical Instantaneous Forward Characteristics Per Diode 120 100 TJ = TJ Max. 8.3 ms Single Half Sine-Wave Instantaneous Reverse Current (mA) Peak Forward Surge Current (A) 100 10 TJ = 150 C TJ = 125 C 80 1 TJ = 100 C 0.1 60 40 0.01 TJ = 25 C 20 0.001 0 1 10 100 0.0001 0 20 40 60 80 100 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 4. Typical Reverse Characteristics Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88681 Revision: 08-Nov-07 MBRF1090CT & MBRF10100CT Vishay General Semiconductor 100 1000 Transient Thermal Impedance (C/W) 10 Junction Capacitance (pF) 0.1 1 10 100 1 10 0.1 0.01 1 0.1 1 10 100 t - Pulse Duration (s) Reverse Voltage (V) Figure 5. Typical Transient Thermal Impedance Per Diode Figure 6. Typical Junction Capacitance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) ITO-220AB 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) REF. 0.076 (1.93) REF. 7 REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 45 REF. 0.600 (15.24) 0.580 (14.73) PIN 0.671 (17.04) 0.651 (16.54) 7 REF. 0.350 (8.89) 0.330 (8.38) 1 2 3 7 REF. 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.191 (4.85) 0.171 (4.35) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.028 (0.71) 0.020 (0.51) Document Number: 88681 Revision: 08-Nov-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of MBRF10100CT-E345
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |